¶ Step 1 - Set-up X Limit Switch Mount
- Cap Head Screw M5x12mm
- X Limit Switch Mount (Printed Part)
- Drop-in T-Nut M5
- Hex Locking Nut M5
- Screw T-Nut into position, but don't tighten just yet.
¶ Step 2 - Mount X Limit Switch
- Fit the T-Nut inside the slot and tighten the screw to lock the mount in place.
- Cap Head Screw M5x16mm
- Xtension Limit Switch small plate
- Xtension Limit Switch Nylon Spacer
- Xtension Limit Switch
¶ Step 3 - Set up Y Limit Switch Mount
- Cap Head Screw M5x8mm
- Y Limit Switch Mount (Printed Part)
- Drop-in T-Nut M5
- Screw T-Nut into position, but don't tighten just yet.
¶ Step 4 - Mount Y Limit Switch
- Fit the T-Nut inside the slot and tighten the screw to lock the mount in place.
- Cap Head Screw M5x20mm
- Xtension Limit Switch Small Plate
- Xtension Limit Switch Nylon Spacer
- Xtension Limit Switch
- Hex Locking Nut M5
¶ Step 5 - Next guide
- Move on to the Spoiler Board Installation.