¶ Step 1 - Prepare the following parts
- Rat Rig Mill - Fixture plate Mill_ Half holes
- 12x M6x12 Cap Head Screws
- 12x M6 4040 Drop in T-nuts
¶ Step 2 - Assemble the fixture plate
- Rat Rig Mill - Fixture plate Mill_ Half holes
- 12x M6x12 Cap Head Screws
- 12x M6 4040 Drop in T-nuts
- Assemble the parts as shown
¶ Step 3 - Install the fixture plate
- Place the fixture plate on the X gantry extrusion.
- Tighten the screws on the fixture plate assembly to secure it on the X gantry extrusion.
¶ Step 4 - Next guide
- Continue with the next guide: https://ratrig.dozuki.com/Guide/08.+Wiring/293?lang=en