¶ Step 1 - Tools for this guide
- The following tools are required for this guide:
- Allen key / hex wrenches in the following size: 5mm
¶ Step 2 - Reinstall the top panel
- V-Core 4.1 Assembly
- Fetch the top panel assembly which was previously set aside during disassembly
- Place the top panel assembly on the top of the V-Core 4.1. The magnets should align the panel and hold it in place
¶ Step 3 - Reinstall the door panel
- V-Core 4.1 Assembly
- Fetch the door panel assembly which was previously set aside during disassembly
- Hook the bottom of the door panel assembly into the front door supports on the V-Core 4.1
- Rotate the door panel assembly towards the V-Core 4.1. The magnets should align the panel and hold it in place
¶ Step 4 - Reinstall the left-hand side enclosure panel
- V-Core 4.1 Assembly - Left-hand side
- Fetch the left panel assembly which was previously set aside during disassembly
- Align the side panel with the V-Core 4.1 frame assembly as shown
- Make sure all of the the T-Nuts are slotted into the extrusion
- Fully tighten all fifteen M6x12 Cap Head Screws to secure the side panel assembly to the V-Core 4.1 frame
- Take care not to overtighten the screws as you can damage or bend the panel
¶ Step 5 - Reinstall the right-hand side enclosure panel
- V-Core 4.1 Assembly - Right-hand side
- Fetch the right panel assembly which was previously set aside during disassembly
- Align the side panel with the V-Core 4.1 frame assembly as shown
- Make sure all of the the T-Nuts are slotted into the extrusion
- Fully tighten all fifteen M6x12 Cap Head Screws to secure the side panel assembly to the V-Core 4.1 frame
- Take care not to overtighten the screws as you can damage or bend the panel
¶ Step 6 - Next guide
- Continue to the next guide: V-Core 4.1 Commissioning