¶ CAD Models
The CAD models for the Rat Rig Rat Pack are available below for download. Select a variant first:
- Open the web viewer for your variant to inspect the full assembly directly in your browser.
- Inside the viewer, you can download the complete model or individual components as needed using the download button in the top right corner.
- The CAD models can be used as a reference when building, servicing, or customizing your machine.
¶ Bill of Materials
Below is the Bill of Materials (BOM) spreadsheet for the Rat Rig Rat Pack, including all necessary components:
¶ Printed Parts
- All files are provided in the correct orientation for printing on a standard FDM 3D printer.
- In general, the printed parts are quite forgiving but are also quite large.
- If you suffer from drafts and/or poor bed adhesion you may need to use brims/rafts for some parts to prevent warping.
¶ Recommended Print Settings
- Perimeters: 4
- Line Width: 0.45 mm
- Layer Height: 0.2 – 0.3 mm
- Infill: 25%
- Supports: None
¶ Notes About Holes
- When slicing the files, some holes may appear covered.
- This is intentional to help the slicer create bridges and simplify the printing process.
- After printing, clear the holes using a screw, screwdriver, Allen key, or matching-size bolt.