¶ Introduction
Here you will find the main resources for the StrongHold One, including the CAD model, Bill of Materials, and printed parts files.
¶ CAD Models
CAD models for all StrongHold One variants are available through the Rat Rig Fusion 360 online viewer.
- Open the web viewer for your variant to inspect the full assembly directly in your browser.
- Inside the viewer, you can download the complete model or individual components as needed using the download button in the top right corner.
- The CAD models can be used as a reference when building, servicing, or customizing your machine.
¶ Bill of Materials
- The official BOM spreadsheet is available for all Rat Rig Mill variants.
- Please be aware that the machine size affects the lengths of some components such as extrusions, linear rails, lead screws and wiring.
- The hardware packs are universal for all sizes.
¶ Printed Parts
- All files are provided in the correct orientation for printing on a standard FDM 3D printer.
- In general, the printed parts are quite forgiving but are also quite large.
- If you suffer from drafts and/or poor bed adhesion you may need to use brims/rafts for some parts to prevent warping.
¶ Recommended Print Settings
- Perimeters: 4
- Line Width: 0.45 mm
- Layer Height: 0.2 – 0.3 mm
- Infill: 25%
- Supports: None
¶ Notes About Holes
- When slicing the files, some holes may appear covered.
- This is intentional to help the slicer create bridges and simplify the printing process.
- After printing, clear the holes using a screw, screwdriver, Allen key, or matching-size bolt.
¶ Next Guide
- Continue to the next guide: StrongHold One Build Guide